824 found, showing page 12 of 21
2PK 1-1/2" RGD 2HL STRAP
2PK 1-1/2" RGD 2HL STRAP
View Details
2PK 1-1/2" RGD 2HL STRAP
5' BGE CORD PROTECTOR
Corduct covers, hides and protects cords and cables while keeping floors clear and safe. It lays flat, stays flat. Easy-to-install. Fits over cords up to 5/16" in diameter.
View Details
Corduct covers, hides and protects cords and cables while keeping floors clear and safe. It lays flat, stays flat. Easy-to-install. Fits over cords up to 5/16" in diameter.
6 STR-500' WHT THHN WIRE
500' 6 STR THHN WHT WIRE
View Details
500' 6 STR THHN WHT WIRE
1G GR WP CVR HOR GFCI***********
Horizontal mount cover for GFCI (ground fault circuit interrupter) receptacles. Made of corrosion resistant aluminum, finished with a protective color coating. For wet locations, closure plugs and screw included. Individually shrink wrapped. UL (Underwriter's Laboratories) listed.
View Details
Horizontal mount cover for GFCI (ground fault circuit interrupter) receptacles. Made of corrosion resistant aluminum, finished with a protective color coating. For wet locations, closure plugs and screw included. Individually shrink wrapped. UL (Underwriter's Laboratories) listed.
1G GY WP BOX (3) 1/2 OUT
Single gang box with lugs, 2 inches deep with 3 outlets, 1/2-inch NPT (National Pipe Thread). Made of corrosion resistant aluminum, finished with a protective color coating. For wet locations, closure plugs and ground screw included. Individually shrink wrapped. UL (Underwriter's Laboratories) listed.
View Details
Single gang box with lugs, 2 inches deep with 3 outlets, 1/2-inch NPT (National Pipe Thread). Made of corrosion resistant aluminum, finished with a protective color coating. For wet locations, closure plugs and ground screw included. Individually shrink wrapped. UL (Underwriter's Laboratories) listed.
*OFFSET EMT 1/2"
Offset, thinwall, EMT (electrical metallic tubing) conduit connector. Provides a simple means of properly aligning distribution boxes, cabinets, and pull boxes by themselves or with runs of EMT. Die-cast zinc. UL (Underwriter's Laboratories) listed.
View Details
Offset, thinwall, EMT (electrical metallic tubing) conduit connector. Provides a simple means of properly aligning distribution boxes, cabinets, and pull boxes by themselves or with runs of EMT. Die-cast zinc. UL (Underwriter's Laboratories) listed.
1/2" FLEX CONECTOR
Screw-in, non-insulated, die-cast zinc connector. For use with armored cable and flexible metallic conduit. UL (Underwriter's Laboratories) listed.
View Details
Screw-in, non-insulated, die-cast zinc connector. For use with armored cable and flexible metallic conduit. UL (Underwriter's Laboratories) listed.
*1/2" FLEX CONNECTOR
Straight set screw, non-insulated connector. For use with armored cable, flexible metallic conduit, and non-metallic cable. Die-cast zinc. UL (Underwriter's Laboratories) listed.
View Details
Straight set screw, non-insulated connector. For use with armored cable, flexible metallic conduit, and non-metallic cable. Die-cast zinc. UL (Underwriter's Laboratories) listed.
500PK 1/2" METAL STAPLE
Easy-to-start and drive cable staple. Constructed of the highest quality carbon steel. Recessed head to direct hammer drive along legs of staple for easier, straighter drive.
View Details
Easy-to-start and drive cable staple. Constructed of the highest quality carbon steel. Recessed head to direct hammer drive along legs of staple for easier, straighter drive.
2-1/2" PLASTIC BUSHING
Plastic, for threaded rigid conduit or IMC 105 C rated. UL (Underwriter's Laboratories) listed.
View Details
Plastic, for threaded rigid conduit or IMC 105 C rated. UL (Underwriter's Laboratories) listed.
ANTI-S BUSHING
Insert into the open end of armored cable or flexible metal conduit to protect conductors from sharp edges. Fits standard cable range 14/2-14/3-12/2. Plastic, 35 per poly bag. UL (Underwriter's Laboratories) listed.
View Details
Insert into the open end of armored cable or flexible metal conduit to protect conductors from sharp edges. Fits standard cable range 14/2-14/3-12/2. Plastic, 35 per poly bag. UL (Underwriter's Laboratories) listed.
2-1/2" LOCKNUT******************
For rigid conduit and IMC, steel. Fully reversible, UL listed.
View Details
For rigid conduit and IMC, steel. Fully reversible, UL listed.
RND OLD WORK CEILING BOX
SuperBlue hard body electrical box. Direct substitute for fiberglass boxes. SuperBlue box will not break when hit with a hammer. Resists flexing and holds shape in extreme conditions. UL (Underwriter's Laboratories) listed.
View Details
SuperBlue hard body electrical box. Direct substitute for fiberglass boxes. SuperBlue box will not break when hit with a hammer. Resists flexing and holds shape in extreme conditions. UL (Underwriter's Laboratories) listed.
OFFSET EMT 3/4"
Offset, thinwall, EMT (electrical metallic tubing) conduit connector. Provides a simple means of properly aligning distribution boxes, cabinets, and pull boxes by themselves or with runs of EMT. Die-cast zinc. UL (Underwriter's Laboratories) listed.
View Details
Offset, thinwall, EMT (electrical metallic tubing) conduit connector. Provides a simple means of properly aligning distribution boxes, cabinets, and pull boxes by themselves or with runs of EMT. Die-cast zinc. UL (Underwriter's Laboratories) listed.
1/2" EMT 1-HOLE STRAP
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 1-hole connection, click-on application.
View Details
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 1-hole connection, click-on application.
50 PK 1" 2-HOLE STRAP
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 1-hole connection, click-on application.
View Details
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 1-hole connection, click-on application.
1" 2-HOLE STRAP
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 2-hole connection, malleable insulated, click-on application.
View Details
Thinwall EMT (electrical metallic tubing) conduit fitting. Features steel construction with zinc plated finish. 2-hole connection, malleable insulated, click-on application.
4x2-1/8x1-7/8 EXT 1/2KO
Pre-galvanized steel handy/utility box extension ring. 2-1/8" W x 4" L x 1-7/8" D, 13 cu in, (8) 1/2" knockouts. UL (Underwriter's Laboratories) listed.
View Details
Pre-galvanized steel handy/utility box extension ring. 2-1/8" W x 4" L x 1-7/8" D, 13 cu in, (8) 1/2" knockouts. UL (Underwriter's Laboratories) listed.
4" SQ COVER 1/2" KO
Steel, 4" square, flat, knockout. UL listed.
View Details
Steel, 4" square, flat, knockout. UL listed.
12STR-500' RED THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
1G WHT WP JNC BOX& COVER
1G WHT WP JNC BOX& COVER
View Details
1G WHT WP JNC BOX& COVER
3/4"x90 DEG NM ELBOW
1-piece 90-degree elbow for use with non-metallic, liquid tight flexible conduit systems.
View Details
1-piece 90-degree elbow for use with non-metallic, liquid tight flexible conduit systems.
1/2x90 DEG NM ELBOW
1-piece 90-degree elbow for use with non-metallic, liquid tight flexible conduit systems.
View Details
1-piece 90-degree elbow for use with non-metallic, liquid tight flexible conduit systems.
3/4" STRAIGHT NM CONNECTOR
1-piece straight connector for use with non-metallic liquid tight flexible conduit systems.
View Details
1-piece straight connector for use with non-metallic liquid tight flexible conduit systems.
1/2" STRAIGHT NM CONNECTOR
1-piece straight connector for use with non-metallic liquid tight flexible conduit systems.
View Details
1-piece straight connector for use with non-metallic liquid tight flexible conduit systems.
50PK 1/2" INSLTD STAPLE
Cable staple ideal for use with all 2-wire UF, non-metallic, and BX cable. 1/2-inch unbreakable clear poly construction, will not bruise wires.
View Details
Cable staple ideal for use with all 2-wire UF, non-metallic, and BX cable. 1/2-inch unbreakable clear poly construction, will not bruise wires.
100' 3/4"LIQTITE CONDUIT
Flexible, liquid tight, non-metallic conduit. Ideal for machinery, air conditioning and heating applications, and outdoor lighting. Safe and easy-to-use. Non-conductive, non-corrosive, abrasion-resistant and consistent diameter. Highly flexible, won't fracture or separate. Cuts easily and smoothly. Resistant to Ozone, alkaline, acid, and oil. Conduit and fittings provide complete nonmetallic, non-conductive system. Ground integrity never compromised. UL (Underwriter's Laboratories) listed for direct burial.
View Details
Flexible, liquid tight, non-metallic conduit. Ideal for machinery, air conditioning and heating applications, and outdoor lighting. Safe and easy-to-use. Non-conductive, non-corrosive, abrasion-resistant and consistent diameter. Highly flexible, won't fracture or separate. Cuts easily and smoothly. Resistant to Ozone, alkaline, acid, and oil. Conduit and fittings provide complete nonmetallic, non-conductive system. Ground integrity never compromised. UL (Underwriter's Laboratories) listed for direct burial.
100' 1/2"LIQTITE CONDUIT
Flexible, liquid tight, non-metallic conduit. Ideal for machinery, air conditioning and heating applications, and outdoor lighting. Safe and easy-to-use. Non-conductive, non-corrosive, abrasion-resistant and consistent diameter. Highly flexible, won't fracture or separate. Cuts easily and smoothly. Resistant to Ozone, alkaline, acid, and oil. Conduit and fittings provide complete nonmetallic, non-conductive system. Ground integrity never compromised. UL (Underwriter's Laboratories) listed for direct burial.
View Details
Flexible, liquid tight, non-metallic conduit. Ideal for machinery, air conditioning and heating applications, and outdoor lighting. Safe and easy-to-use. Non-conductive, non-corrosive, abrasion-resistant and consistent diameter. Highly flexible, won't fracture or separate. Cuts easily and smoothly. Resistant to Ozone, alkaline, acid, and oil. Conduit and fittings provide complete nonmetallic, non-conductive system. Ground integrity never compromised. UL (Underwriter's Laboratories) listed for direct burial.
*CONNECTOR STEEL
Conduit connector used to connect B1 raceway directly to 1/2" conduit. Can also be used with outlet boxes with 1/2" knockout. Steel, ivory baked enamel finish. UL listed.
View Details
Conduit connector used to connect B1 raceway directly to 1/2" conduit. Can also be used with outlet boxes with 1/2" knockout. Steel, ivory baked enamel finish. UL listed.
4" SQ RSD 1/4" COVER
Steel, 4" square combination, covers 2 devices, raised 1/4". UL listed.
View Details
Steel, 4" square combination, covers 2 devices, raised 1/4". UL listed.
10SOL-500' BLU THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Solid copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Solid copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
PROTECTOR CORD BROWN 5'
Corduct covers, hides and protects cords and cables while keeping floors clear and safe. It lays flat, stays flat. Easy-to-install. Fits over cords up to 5/16" in diameter.
View Details
Corduct covers, hides and protects cords and cables while keeping floors clear and safe. It lays flat, stays flat. Easy-to-install. Fits over cords up to 5/16" in diameter.
4PK 1-1/4" RGD 2HL STRAP
4PK 1-1/4" RGD 2HL STRAP
View Details
4PK 1-1/4" RGD 2HL STRAP
3/4" CONDUIT HANGER W/BOLT
3/4" CONDUIT HANGER W/BOLT
View Details
3/4" CONDUIT HANGER W/BOLT
1/2" GRY 5HLE RND WP BOX
1/2" GRY 5HLE RND WP BOX
View Details
1/2" GRY 5HLE RND WP BOX
2G GRY VRT DPLX WP COVER
2G GRY VRT DPLX WP COVER
View Details
2G GRY VRT DPLX WP COVER
10/3 UFB WIRE 250'
Type UF-B cable is designed specifically for use as underground feeder cable for direct earth burial in branch circuits, and indoors for wet or corrosive locations. Highly resistant to acids, alkalis, corrosive fumes, chemicals, lubricants, and ground water. It is noncorroding, sunlight-resistant, and will not support combustion. 600 volts, 75 degrees Celsius rated. UL (Underwriter's Laboratories) listed.
View Details
Type UF-B cable is designed specifically for use as underground feeder cable for direct earth burial in branch circuits, and indoors for wet or corrosive locations. Highly resistant to acids, alkalis, corrosive fumes, chemicals, lubricants, and ground water. It is noncorroding, sunlight-resistant, and will not support combustion. 600 volts, 75 degrees Celsius rated. UL (Underwriter's Laboratories) listed.
